Automotive Forums  Where Car Enthusiasts Go to Discuss Cars Online

I am trying to do some maintenance on my own car and am looking for a good source of do it yourself videos and information to help me with the general maintenance for my car

According to my owners manual I am due for a Oil change, new automatic transmission fluid, Air Filter, and probably new brake pads. I am trying to save some money by learning to do these things myself.


Does anyone know of a good site that provides good information? the problem with videos on youtube is that a lot of it is bad information, and you have to sift through too much crap to find what i want.

Thanks,

DIY Guy  

I actually have a website that is just what you're asking for. There are over 60 videos so far, focused on DIY maintenance, but also more basic stuff like changing a flat tire and more advanced like performance upgrades. Also some tips on how to save money on repairs, etc

I have very little info on diagnosis as this is a case-by-case thing, so you'll want to keep coming to CarForum for anything model-specific, or any major repairs. But for videos, please come check us out. I won't post the link but it is easy to find.    
....................
Curtis
TheFreeMechanic
(Free car care videos.  Mechanic's tips on DIY maintenance, and finding cheaper auto parts)

Exactly what i was hoping to find.  thanks freemechanic.

I was having trouble with the brakes and transmission fluid, this is going to help.


Cheers.  

one thing  diy guy.. different cars require different types of brake pad installation..


the function the same..   but installation varies from brand and models within a brand..  

Wayne is correct, each car has a slightly different design.  The video shows a common design, but it's only one vehicle.

On most cars the caliper simply bolts on, but in some cases you'll need a special tool (like a hex socket, which fits the same fasteners an Allen key but is used on a ratchet wrench), and in some rare cases (older Fords) the caliper is held by sliders that pop out with a hammer & punch.

The most important thing is to reassemble it the way it came apart.  For example if there are thin metal shims on the back of the brake pad, they should be removed, cleaned and reinstalled on the new pads (with a thin film of silicon grease).

Also, use a small amount of blue Loc-tite on the bolts.  
....................
Curtis
TheFreeMechanic
(Free car care videos.  Mechanic's tips on DIY maintenance, and finding cheaper auto parts)

My car is broken



 

Read this article and save a ton of money by following these simple steps to repair your own brakes. Written by a veteran mechanic.