stay connected
I have a 2000 Silverado 4X4 wih a 5.3L V-8 I replaced the transmission yesterday and now truck spins over but will not start. I have checked I am getting no spaark checked all fuses and there good. I also checked the cranksshaft sensor under the start to make sure it didn't come disconnected. I also put a new neutral safety box on the side of the transmssion and set it properly it is showing park on the dash. I don't know what else to do any ideas
is the crank shaft position sensor plugged in.. and working.. can you see the crank shaft RPM signal with a scan tool...this looks like the cam shaft sensor is on the back of the block and when the engine tilted down.. you might have crushed the connector.. or snapped the sensor off.
is there ANY chance the wiring harness got pinched between the back of the engine and the transmission...????