|
Item Posts
|
|
|
|
|
|
Posted: 04/25/09 04:09 PM
|
|
Car is 1998 Volvo V70 with 2,4L 5 cylinder gas motor.
Engine has a rear seal oil leak-Oil present at vent hole between Engine & Auto Transimssion housing.
Is a split seal avaialble? What is the Easiest way to change the Seal?
Alternatively are there related issues (bad PCV etc) that can cause this problem.
|
|
|
|
440t4
Enthusiast
| Posts: 304
| Joined: 04/09
Posted: 04/25/09 06:43 PM
|
|
Im not familiar with this exact engine but any car from the mid 80's up should have a one piece rear main seal.You have to remove the trans and flywheel to replace it.The seals usually go bad from age and heat but check the pcv also.
|
|
|
|
|
|
|
|