Automotive Forums  Where Car Enthusiasts Go to Discuss Cars Online

driver side window control will not work any of the 4 windows, but the driver memory and door locks work.  

did it get ***    do the individual windows work at the their switches????    water and other liquids tend to gob things up inside the window switches..

is the circuit breaker or fuse for the windows working...

is the back of the switch still plugged in???


got any broken wires in the door harness where it goes from the door to the body..  through the rubber sleeve..    


here is the window diagram for the left side

http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/10/49//large/0900c152800a1049.gif

looks like the large orange wire has the power on it.. be sure to not mess with the thin tan and brown wires... they are data circuits...

here is the wiring diagram for the right side

http://econtent.autozone.com:24991/znetrgs/repair_guide_content/en_us/images//0900c152/80/0a/10/4a//large/0900c152800a104a.gif



with it connected to the ecm... you might should be able to get trouble codes out of the OBD2 connector with a CAN enabled scan tool...  can is controller area network... the computer talks to everything now a days...  if you get codes... there will be trouble shooting charts to follow...  

check out the connections

used-auto-engines