Automotive Forums  Where Car Enthusiasts Go to Discuss Cars Online

Did you check the link in one of the previous posts if that doesn't help , post your email.  

I know this is an old post, but I was wondering if you could e-mail me these instructions. I'm working on my sisters car and just found the part about the alignment tool. E-Mail Robert at tanya0974@yahoo.com. I don't suppose you know if the timing belt breaking 2.0L DOHC damages the valves or if it is a free floating type of system were when the belt breaks it don't make contact between the pistons and valves.

                           Thanks for any help,
                                             Robert  

We are having the same problems. Could you plese sent us the emails too?
Thanks  

I need the full and right procedure to change a timing belt on a 98 Ford Escort zx2 just like you emailed to other people who have posted on here in the past. i know my post is dated much later than the other ones but I have the haynes manuel as well and that timing peg hole you can't see where it is in the picture in the manual. If you know all of the exact sockets I would need for the job including to take the other stuff off required like the drive belts, valve cover, and catalytic converter, water pump pulley, etc. I know so far i need compression gauge, camshaft alignment tool, that one timing puller piece. I called Oreilly auto parts and they said they dont carry the timing peg nor the camshaft alignment tool and told Me to go to the snap on website and they dont seem to have it either, where can I get these? I thank you for your time and info, My Email is tmkofsp@gmail.com  

Check you email at gmail.
you can order these tools from ford.  

I am also having problems with locating the loation of the alinment pin. Is ther an alternative method. way to much stuff in the way to see pin location. help!!  

I need help on timing up a 2000 escort with a twin cam could you send me the info on timing up the cams and the crank my email is m.chappell30@yahoo.com your help would be greatly appreciated  

I need help on this as I am using the Haynes automotive guide which is not very clear.  Can you send me the email at jchavis15@gmail.com.

I tried the links you posted but they did not work.

Thanks very much.