|
Item Posts
|
|
|
|
|
jkbuick
New User
| Posts: 1
| Joined: 06/06
Posted: 06/13/06
05:23 AM
|
|
What am I missing? Released 2 top clips, loosened flexible hose to engine... cover does nor release... is there other screw/clip/? to be loosened?
|
|
|
|
|
Posted: 06/13/06
08:09 AM
|
|
usually there are 4 clips on the sides of the of the air box, sometimes there is a screw, other times it is just two clips on the very top of the box that hold a small section for the air filter on. But it sounds like you have the 4 clips on the side since you had to disconnect the breather hose. Look around for more clips or a screw, you'll find it.
|
|
|
|
aquabat911
Enthusiast
| Posts: 708
| Joined: 04/06
Posted: 06/13/06
08:39 AM
|
|
I have seen a few cars recently that use clips on one side and then tabs that are molded into the box on the opposite side(Apparently 4 clips was way over budget). Once you get the clips off the tabs will require you to twist the airbox lid a little to get them out of the slots. It sometimes requires a little BFF to get the tabs out of the slots. I know this is just about worthless without pics, but you may have to just keep playing with it.
|
|
|
|
|
|
|
|