|
Item Posts
|
|
|
|
|
|
Posted: 05/18/06
12:13 PM
|
|
for the past few months my s-10 has been having a misfire. while driving it will misfire until i get to a high rpm then it will run fine until it shifts. i have replaced the egr valve and nothing. plug wires, plugs, coilpacks are all new and still it misfires. But here is what is weird, when i pull a little 10 amp fuse labled as "gauges" out the truck will run fine but the battery will not charge. I plug it back in and it starts to misfire again. Any help would be appreciated. thanks
|
|
|
|
|
Posted: 05/18/06
12:20 PM
|
|
someone told me it may be the crankshaft sensor or the camshaft sensor. i am tearing into them this weekend to see if that will help
|
|
|
|
|
Posted: 05/19/06
02:35 AM
|
|
how did end up deciding to pull your gauge fuse to see if would stop mis firing?
|
|
|
|
|
|
|
Posted: 05/19/06
11:22 AM
|
|
i was trying to find the fuse to my dome light while the truck was running and it just stopped misfiring when i pulled the fuse. when i plugged it in it started misfiring again. its gotta be something electric. i was also told it could be a bad computer but i think it may be a short somewhere.
|
|
|
|
|