|
Item Posts
Sort Order
|
|
|
|
|
|
Posted: 11/18/06
05:20 AM
|
|
I have a 2002 dodge intrepid with a DTC code of P0700. With this code the check engine light comes on and the transmission will not shift into the higher gears. Once the code is cleared the transmission works fine until the light comes on again, approx. 10 miles or so. Is there some type of sensor starting to fail? Thanks, Joe.
|
|
|
|
JEEPTECH
User
| Posts: 54
| Joined: 11/06
Posted: 11/18/06
07:49 AM
|
|
DTC P0700 IS A TRANS CODE, YOU NEED TO READ THE TRANS CONTROLLER TO FIND
THE TRANS CODE,YOU PROBABLY HAVE AN OUTPUT SPEED SENSOR BAD,BUT YOU NEED TO HAVE THE CODE READ.
|
|
|
|
|
Posted: 11/18/06
09:27 AM
|
|
How do you read the trans controller? do I have to take it to a shop?
|
|
|
|
|
|
|
JEEPTECH
User
| Posts: 54
| Joined: 11/06
Posted: 11/18/06
12:18 PM
|
|
your best option is to take to a shop or your local dealer
|
|
|
|
|
Posted: 01/16/07
05:02 PM
|
|
I was a salesman driving 50K a year and have had 24 chryslers. I retired a fiew years ago and do not drive much now so my 2000 300M only has 54K on it. The transmission on my last concord had problems ultil they replaced the computer but the 300M trany just failed and the dealer charged $2400 to rebuild it. Thids just does not make sense since it got only light use.
Is there anything inheriently wrong with this trany? I will get rid of it if there is but isn't it the same trany as concord?
|
|
|
|