|
Item Posts
Sort Order
|
|
|
|
|
|
Posted: 01/01/07
09:52 AM
|
|
The turn siganals will work sometimes then stop. The blower for the heater will do the same thing. I replaced the flasher but no solution. Any thoughts?
|
|
|
|
nickb2
Guru
| Posts: 816
| Joined: 08/06
Posted: 01/01/07
05:59 PM
|
|
well you may have 2 different issues...for the blower, next time it is not working check for power and ground at the motor to see if it is electrical or the blower itself. As for the turnsignals the switches are faily common, but the best way to test this is next time they are inop test for input at the flasher (also inspect all sockets for burning or other damage causing a short to ground
Nick
ASE Master Auto Technician, L1
ASE Master Auto Technician, L1, ASE Certified Service Consultant, ASE Certified Parts Specialist, Chrysler Certified Service Manager/Technician
|
|
|
|
|
|
|
|