|
Item Posts
Sort Order
|
|
|
|
|
BobJrNC
New User
| Posts: 2
| Joined: 07/06
Posted: 07/23/06
01:14 AM
|
|
I currently have a 1995 Chevrolet Cavalier 2.2L with an automatic transmission. My wife was currently driving the car when it stopped shifting past 2nd gear. I checked the fluid levels and it was low so I refilled it to the proper levels with no change in the result. I drove the car this morning and I have heard say if the transmission was broke there would be some grinding noise where the gear(s) where breaking, but I hear none of that type noise coming from the transmission. Any alternative solutions other than complete transmission overhaul are welcome. Thanks.
|
|
|
|
Gary_602Z
Enthusiast
| Posts: 423
| Joined: 06/06
Posted: 07/23/06
02:49 AM
|
|
Any check engine lights on? What does the fluid look or smell like? Are you sure it is not going into 3rd but just not going into overdrive. many times a TPS sensor can cause it not to go into overdrive. I would get it scanned to see if you have any codes.
Gary
|
|
|
|
BobJrNC
New User
| Posts: 2
| Joined: 07/06
Posted: 07/23/06
03:12 AM
|
|
No check engine lights are coming on. The transmission fluid that was in there had a very similar color to the new that I put back into the transmission to get it back to the right level. As far as the shifting I have D1, D2, and D on my column. I can manually shift from D1, D2, but if I go from D2 to D it doesn't go any further. It just goes into high revs which I don't let it get up to high. It is the same if I just put it in D and let it go automatically.
|
|
|
|
|
|
Gary_602Z
Enthusiast
| Posts: 423
| Joined: 06/06
Posted: 07/25/06
08:41 AM
|
|
How low was the tranny fluid?
Gary
|
|
|
|
|
|